Video Transcript
Time: 0:00-0:09
These are Tandemloc's AQ25A series beam clamps. We offer multiple models with working load limits ranging from 2,000 to 10,000 pounds.
Time: 0:09-0:18
They also range in minimum and maximum clamped width from 3 to 9 inches to 4 1/2 to 12 1/2 inches.
Time: 0:18-0:27
Tandemloc AQ25 series beam clamps are dual-purpose. First, they are designed as an ASME B30.20 below-the-hook lifting device.
Time: 0:27-0:34
Second, they are also designed as a structural fixed point to hang manual and powered hoists per ASME B30.16.
Time: 0:34-0:45
Since AQ25A series beam clamps are an ASME B30.20 lifting device, they are suitable for lifting and moving many different I-shaped structural members and fabrications.
Time: 0:45-0:56
These include W shapes, M shapes, HP shapes, and S shapes if they are within the clamped range and working load limits of the selected model.
Time: 0:56-1:05
When using one of the AQ25A series beam clamps as an attachment point for hoists, it is limited to only vertical lifting.
Time: 1:05-1:14
All the AQ25A series beam clamps are proof tested to 125% of the working load limit per ASME B30.20 specification.
Time: 1:14-1:21
If you want more information about these products, you can visit our website at Tandemloc.com. You can also reach us by emailing [email protected] or calling 1-800-258-7324.
