Video Transcript
Time: 0:00-0:09
This is Tandemloc's 300-ton patented proof test stand. Since Tandemloc takes such pride in performing proof tests and providing proof test certificates for each individual below-the-hook lifting device, we had to develop an efficient way to complete those tests.
Time: 0:09-0:18
This design and method were developed by the founder and head engineer of Tandemloc back in 2006. The proof test stand test bed is 60 feet long and 13 feet wide and is very capable of testing a variety of custom items.
Time: 0:18-0:27
The proof test stand can test a very wide variety of shapes and sizes, mainly due to the rolling beam feature and the sheer size of the test bed, which provide countless anchoring locations so that the test load is distributed as in actual field conditions.
Time: 0:27-0:39
The rolling beams have several pad eyes spaced along the Y-axis, and the beams can roll back and forth along the test bed along the X-axis. This provides instant anchoring points for the test specimens of varying shapes and sizes.
Time: 0:39-0:50
Eliminating the need to measure, locate, and weld permanent fixed anchoring points. The proof test stand line of pull is in the horizontal direction rather than vertical, and that results in easier rigging since the connections will always lie within the horizontal plane at the same height.
Time: 0:50-1:02
With the test stands that pull vertically, the connection points can vary in height, making it more difficult to rig, often requiring the use of man lifts or other equipment should these connection points be unreachable by a man standing on the floor.
Time: 1:02-1:15
Also, loading products in the test stand is simplified as 50% of the stand's structure is below grade, allowing free movement of the forklifts right up to the test bed.
Time: 1:15-1:30
This proof test system also incorporates a video system which records every test and load reading is fed directly onto the recorded image. Damages cannot be edited, which provides concrete proof that an item has been tested properly.
Time: 1:30-1:50
This is a great quality assurance tool for Tandemloc and far better than just a paper certificate for the customer, who now can be absolutely convinced that his lifter was in fact tested.
Time: 1:50-2:05
If you want more information about these products, you can visit our website at Tandemloc.com. You can also reach us by emailing [email protected] or calling 1-800-258-7324.
