PROUDLY MADE IN THE USA / Sales: 1-800-258-7324 / All Other Inquiries: 1-252-447-7155

Tandemloc Universal Bridge Clamp

   

Video Transcript

Time: 0:00-0:07

This is Tandemloc's P0500AC1PC universal bridge clamp.

Time: 0:07-0:12

There are many bridge clamps on the market, but none of them are more versatile than our universal bridge clamp.

Time: 0:12-0:25

The Tandemloc universal bridge clamp can be used when clamping any aperture on an ISO 1161 top or bottom corner fitting. The corner fittings on containers can be up to 12 inches apart or right next to each other when using our bridge clamp.

Time: 0:25-0:35

The Tandemloc universal bridge clamp is comprised of four components: a steel bolt with yellow zinc chromate finish, painted T-1 steel clamp arms, and a zinc-plated adjustment nut for securing the clamp arms in place.

Time: 0:35-0:43

Along with the paint on the clamp arms and zinc plating on the nut, the zinc chromate finish on the bolt guards against corrosion. The superior T-1 steel that the clamp arms are made of is extremely durable; most bridge clamps in the industry are made from cast steel.

Time: 0:43-1:00

To use the universal bridge clamp, you turn the bolt counterclockwise to lengthen and clockwise to shorten. Once the span is at the optimal length for the corner fitting distance, turn the hex on the bolt using a 2 1/4 inch drive until the containers are at the desired spacing.

Time: 1:00-1:14

The universal bridge clamp can be used when securing side to side or top to bottom. As mentioned earlier, it can be used in conjunction with any ISO 1161 corner fitting aperture.

Time: 1:14-1:25

If you want more information about these products, you can visit our website at Tandemloc.com. You can also reach us by emailing [email protected] or calling 1-800-258-7324.