Video Transcript
Time: 0:00-0:09
These are Tandemloc's 20901AA series top lift lugs with a working load limit of 25,000 pounds.
Time: 0:09-0:15
The top lift lugs are used to lift containers with ISO 1161 corner fittings.
Time: 0:15-0:23
When lifting loaded containers from the top for ISO 1496 and ISO 3874, the sling angle from horizontal must be at 90 degrees. Only empty containers can be lifted from the top with a sling angle.
Time: 0:23-0:33
This is the 20901AA-1PA top lift lug with master link. This lift lug is meant to be used when lifting a container without a sling angle. When using the top lift lug, it must be inserted in the top corner fitting and rotated 90 degrees.
Time: 0:33-0:42
After the lift lug is rotated, the gravity plate will fall into place, providing an extra measure of security for lifting empty containers with a sling angle.
Time: 0:42-0:54
Tandemloc offers the 20901AA-4PA with flex link. Insert the lift lug into the top corner fitting and turn it 90 degrees. After turning the lift lug, the gravity plate will fall into place, securing the lift lug in place.
Time: 0:54-1:05
All 20901AA series top lift lugs are proof tested to 200% of the working load limit. Lift lugs are shipped with proof test certificates and a certificate of conformance.
Time: 1:05-1:22
If you want more information about these products, you can visit our website at Tandemloc.com. You can also reach us by emailing [email protected] or calling 1-800-258-7324.
